Installation and reducer of axle reducer and precautions and installation.

First, the installation of shaft-mounted reducer
(A) the relationship between the reducer and the installation of the working machine
In order to avoid the work machine spindle deflection and in the reducer bearing on the additional force, the distance between the reducer and the working machine, without affecting the normal working conditions should be as small as possible, its value is 5-10mm.
(B) cycloidal speed reducer and work machine connection
The reducer is directly mounted on the working machine spindle, and when the reducer is running, the counter-torque acting on the reducer housing is installed on the reducer chassis or is balanced by other methods. Machine directly match the other end with the fixed bracket connection.
(C) the installation of anti-torque bracket
The counter-moment bracket shall be mounted on the side of the working machine towards which the reducer is oriented to reduce the bending moment attached to the working machine shaft. The counter-moment bracket and the sleeve of the fixed support link use elastomers such as rubber to prevent the occurrence of deflection and absorption of the generated torque ripple.