The following will be a detailed description of the reducer using oil skills and methods.

First, when refueling can be open the upper part of the seat ventilation cap can be refueling. Turn off the lower part of the seat when the oil drain plug, you can release the oil. The reducer is factory free of oil.
Second, the new reducer has been added lubricants, once every six months to replace. Grease with aluminum disulfide-2 # or 2L-2 # lithium-based grease.
Third, the helical bevel gearmotor in the normal use of oil sump lubrication, oil level can be maintained in the middle of the window can be in the working conditions, the ambient temperature at high temperatures can be used to lubricate the cycle.
Fourth, the first refueling operation 100 hours should replace the new oil, and the internal sewage rinse clean and then continue to work every six months to replace the 8 hours of work, if the working conditions may be appropriate to shorten the oil change time, practice proved reducer Of the regular cleaning and oil change for the extension of the life of the gear has an important role. In the course of the use of lubricants should always be added.
5, vertical installation worm reduction gearboxes to prevent oil from the oil, in order to avoid damage to the parts of the reducer.
6, cycloid reducer at room temperature generally use 40 # or 50 # mechanical oil lubrication, in order to improve the performance of reducer to extend the cycloid reducer life, it is recommended to use 70 # or 90 # extreme pressure gear Oil, in the case of high and low temperature can also be reconsidered when the oil.
The analysis can be used to analyze the oil for the entire reducer operation has played a very big role. In the normal temperature, the use of oil can fully provide the performance of reducer. In the long-term work and the use of reducer, you can effectively protect the reducer and extend the life of the reducer.