high-ratio of the NMRV worm geared motor

NMRV worm geared motor and worm gears provide an effective answer for power transmission applications requiring high-ratio speed reduction in a limited space using right angle (90°), non-intersecting shafts. When properly applied, worms and worm gears provide the smoothest, quietest form of gearing.

worm gear efficiency of a worm gear drive depends on the lead angle and number of starts on the worm - and because increased efficiency is always a goal, the ratio should be kept as low as possible. To run properly, worms and worm gears used together must have the same diametral pitch and threads.

High efficiency of the Tork Drive miniature bevel gearbox

Tork Drive miniature bevel gearbox offer  light weight bevel gearbox,light duty bevel gearbox,miniature bevel gearbox,small bevel gearbox, include BYD Motor-inside Electric Drum aluminium bevel gear box features: 

1. 90 degree angle assembly spiral bevel gears. 

2. Miniature and ultra light weight corrosion resistance die-cast aluminium housing. 

2. Used to transmit rotary motion, mechanical power and torque. 

3. High efficiency bevel gearbox, up to 95%. 

4. 1:1 gear ratio and 2:1 reduction gear ratio , customized special gear ratio.

speed increaser gearbox to increase energy efficiency

speed increaser gearbox is possible to significantly increase gearmotor efficiency by replacing a permanent split capacitor (PSC) ac motor with a permanent magnet dc (PMDC) motor. PSCs may have greater maximum efficiency potential, but their true efficiency can be much lower at the actual application operating load point. Also keep in mind that three-phase driven gearmotors are much more efficient than the single-phase equivalent (for example, 64% vs. 53%) and are more reliable because of their simplified design. However, when three-phase power is unavailable, a High Efficiency Vf  Worm Gearbox is required to convert single-phase input to three-phase output for the gearmotor. Today's VFDs are economical and easily justified when one considers their built-in features, such as soft starts to reduce mechanical shock and increase equipment life.