Mechanical variable speed drives

The speed of a mechanical variable speed drives controls the machine, pump, blower, agitator, and conveyer connected to it. Under normal circumstances, the motor running at a fixed speed, and manufacturing method of the motor speed depends on the power supply frequency, mechanical variable speed drives before was about to drive motor effectively change the power frequency, let the motor run at different speeds. The drives you can change any motor driven machines and equipment running speed, speed changes to the actual needs from the nature, can be finished by automatic or manual operation, so that the equipment running speed to meet the changing conditions.

Cycloidal reducer

Cycloid speed reducer input shaft with eccentric sleeve rotation week, because of the characteristic of the cycloid gear tooth profile curve and its restricted by needle on the gear teeth, the movement of the cycloid gear becoming both revolution and rotation of the plane movement, turn on the input shaft is week, eccentric sleeve also turn the week, cycloid gear turned a gear reduction is obtained in the opposite direction, and with the help of W output mechanism, the cycloid gear rotates at low speed movement through the pin shaft, passed to the output shaft, low output speed can be achieved.
Cycloidal reducer with Several Tooth, High Strength, Credibility and Long Lifespan Made of Bearing Steel

Cycloidal gearbox

The cycloidal gearbox is a novel transmission device which applies the planetary transmission principle and the cycloidal needle teeth meshing. The gear box of cycloidal gear can be divided into three parts: the input part, the deceleration part and the output part. Dislocation on the input shaft is equipped with a 180 ° of the double eccentric sleeve, turn on the eccentric sleeve is equipped with two called arm of roller bearing, the formation of H, two cycloid gear center hole is the eccentric sleeve on the turning arm bearing raceway, and by a group of cycloid gear and pin gear mesh circular permutation needle, to form tooth difference for the internal meshing gear reducer.